How To Maintain Your Furnace

Nowadays, most households have some kind of central heating system installed. These machines distribute heat around the house during the winter seasons. They can be connected to a water pipeline to heat the water as well. 

But these machines run around the clock during the coldest of winters. So it is better to maintain and get a head start for the upcoming winter seasons. You can get good maintenance service from furnace companies in Forney, TX.

Although furnaces are complicated rugged machines that run on electricity, oil, fire, and all, it would be natural if you do not want to risk your untrained hands. But there is some scope of general maintenance you can do yourself. Read this article for guidance. 

Start early 

Cleaning and maintaining a bit like car maintenance. A lot of moving parts machinery, screws, wrench, cleaning brush. So you will need a lot of light, and You have to finish before sunset. So, you can enjoy a bit of warmth after the hard work. Try to start early in the morning. 

Step 1. Check the Outside

Before starting the clean-up, clear the surroundings. Blow off the dust, vacuum the floor. Discard any flammable objects. 

Step 2. Check the filters

The filters in the machinery are the most important parts of a furnace. It prevents the entry of dust particles, pollen, mites, and mold. It is there to keep the insides of the house dust-free. Not only that, but it is the easiest of them all to clean and replace.

Suppose you want to replace the filters. Then contact furnace companies in Forney, TX, for expert help. 

Step 3. Check the blower motor

There is a blower motor inside the furnace that distributes warm air inside the house. It facilitates the heat exchange process until the desired room temperature is achieved. It is also the attachment point for the filters. Furthermore, it is a machine with a lot of moving parts. 

Step 4. Check thermostat

The thermostat is the circuit breaker device that tells your furnace when to turn off and on. If you know the inner workings, then only take it apart and clean the censors. It is recommended that you ask for expert help in matters of thermostat maintenance. You can contact any furnace companies Forney, TX, for expert advice.

Step 5. Check the pilot 

The pilot is only present in gas furnaces. So, if you have an electric heating system, then you can skip this part. The pilot is a steak of flame for igniting the combustion fuels. If you can see the flame burning yellow then, the pilot has to be cleaned properly. 

Foz Air and Heat Inc. 

Here at Fox Air and Heat Inc, we offer 24/7 emergency and annual maintenance service at an affordable price. We also offer twice-yearly maintenance in the maintenance club. You can contact us online, by phone, or by email. 

Contact us

Email: [email protected]

Call: (214) 392-7584

Get A Quote